DIY Striped Painted Rug in about 2.5 Hours!

After the time intensive driftwood herringbone table, we were definitely ready for a quick and easy project! Painting stripes is probably one of the easiest projects to tackle. Laying out the tape takes about an hour, and painting (depending on amount of coverage you want) takes about 1.5 hours (a little more for drying time in between coats) Definitely achievable as a day or less than a day project!

He's how we did it! 

We decided to give the rug a little extra interest by offsetting the stripes, similar to this rug from Ikea. It only took a little extra effort and probably made it a little easier to keep the tape straight. Definitely worth it! 

We divided the rug into thirds, starting in one corner we laid a piece of 3m edge seal 2" tape (a little over a third of the rug so there would be overlap). We repeated, using little pieces of the 2" tape to set the offset between stripes. 

After all of the tape was laid out, we measured the thirds again, drew a line with a pencil, and cut the tape down the pencil line. At first we used scissors, but then moved to lightly cutting it (not through to the rug) with and xacto knife. It moved faster since we didn't have to lift the tape up and reattach it. 

I then walked around on the tape to make sure that it was secured to the rug... Annabelle thought I was crazy ... I put paint tarps around the edges to protect the carpet (always a must!) Then I mixed up a custom gray with flat paint that I had laying around the house and started rolling it on! I did three light coats (letting it dry in between) until there was even coverage. 

The only thing that I would of done differently was carry it down to the garage. As you can see from the first picture, we did it in the office area and it was very cramped! It took some interesting maneuvers get around the wet paint. Rolling on an even surface (instead of the carpet underneath) would of been easier too. 

I took the tape off and that was it! This was such an easy and fast way to get a large graphic pattern.

I picked up an acrylic picture frame to use as a tray, idea thanks to Just a Girl! I love that you can see the herringbone pattern through the tray!

The living room is really coming together! Just a few more finishing touches!

Sources/Price breakdown:

Ikea Erslev rug: Already owned, but Ikea doesn't carry it anymore (anyone know of a good substitute?)
Painter's tape: 2" 3M Edge Seal painter's tape $8 - Wal-Mart (we used exactly one roll, I know random!!)
Paint: Custom mixed light gray from leftover Behr and Glidden flat paint - Home Depot

Total Cost: $8 (since I had everything but the tape on hand!)

If you haven't tried a striped rug yet, you MUST! It is super fast/easy and can add the perfect punch of contrast, pattern, color to a space!

Read more »

DIY Herringbone + Chevron Rug + Delta Touch2O

Over the weekend we painted the Danny Seo jute Runner that I picked up at TJ Maxx the other week. I was inspired by Serena & Lily's Feather rug, a mix of chevron and herringbone patterns.

I was ambivalent to paint it because of the rise in the jute; however, using 3M painters tape hard to stick surfaces (the green one) it worked great!

We measure and centered the two vertical vertical lines, to lay out the rest we used a piece of paper with two dots, so that the distance was equal. As we went, we pushed the tape down into the crevices so that the tape would have good adhesion. 

I used SW Overjoy and SW Loyal Blue, left over from the console table in the bedroom and the Moroccan rug to mix a teal. 

I painted the larger areas and David filled in the hard to reach spots with a small brush. The key to getting clean lines with tape or a stencil is to use a thin layer of paint, especially near the edge. 

It took about an hour to lay out the tape and an afternoon to paint.

Once done, I removed the tape and admired the clean lines (I was a little nervous up until this point!) 

I decided to put it in the kitchen underneath the sink and dishwasher. It is nice to have something break up the matching cabinets and floor!

You may also notice our new Delta Touch20 Faucet, which I got to try out after attending Delta's blogger event in June. Yes, we may be crazy for installing it since it is a rental, but I couldn't help myself ... I just had to try out the touch on and off feature. Plus it was super easy to install, so not too much time invested in that, I imagine it should be easy to take out too (it's definitely coming with us!) 

It took a few days to get used to the touch feature after using a normal kitchen faucet, but a few days later it was second nature ... I hope I never have to go back! David even says to me every so often that he really likes it! 

Annabelle seems to like the rug ... or maybe she is just asking me for a treat? (they are next to the sink)

This is my first Danny Seo product, and I'll definitely be on the lookout for more! The rug is beautiful, thick and well made! 

Read more »